Floor Monitor - Electro-Voice ELX200-10P-US Installation Manual

3.2

Floor monitor

ELX200-10P, ELX200-12P, and ELX200-15P loudspeakers may be used as a floor monitor by
placing the loudspeaker on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1.
2.
Notice!
Secure cables with wire ties or tape whenever possible.
Figure 3.2: Optimum coverage in monitor position (side view left and front view right)
See also
•
Electro-Voice
Place the loudspeaker on a level and stable surface.
Safely route cables to prevent injury to performers, production crew, and audience
members.
Full-Range loudspeaker DSP control menu, page 22
OPTIMAL
COVERAGE
Installation manual
en 15
2017.06 | 01 | F.01U.326.891