Programming The Remote Control - LG 37LG710H Owner's Manual

PROGRAMMING THE REMOTE CONTROL

The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
Testing your remote control.
1
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB(Set-Top Box) and press the corresponding mode button (such as a S T B) on the
remote control, while pointing at the component. Test the POWER and C H
ponent responds correctly. If the component does not operate correctly, the remote control requires pro-
gramming to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as S T B) on
2
the remote control. The remote control button of the desired device is illuminated.
Press the MENU and MUTE buttons simultaneously, and the remote control is ready to be programmed with
3
the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
4
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the MENU button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
buttons to see if the com-
109