Allen-Bradley 1756-L61 ControlLogix 5561 Programming Manual page 36

Chapter 2 Organizing Tags
34
The entries in the list depend on the tag's data type. You can check more
than one property.
For data type
Array and string
Bool
DINT, INT, LINT, SINT, and REAL and corresponding
array member
The added properties are displayed in the Data properties category in the
Tag Properties pane.
Clear the check box to remove the property from the tag. This also
removes the properties from the Data properties category. Note that once
the property is removed, any value associated to the property is removed
from the system.
The list is not available for other types of tags.
Min and Max for DINT, INT, LINT, SINT, and REAL Data Types
Data Type
DINT
INT
LINT
SINT
REAL
Rockwell Automation Publication 1756-PM004D-EN-P - September 2012
You can add the following extended
property
Engineering Unit
State0
State1
Engineering Unit
Min
Max
Engineering Unit
Range
-2,147,483,648...2,147,483,647
-32,768...32,767
0...32535129599999999
-128...127
-3.402823E38 to -1.1754944E-38 (negative values)
and
0
and
1.1754944E-38 to 3.402823E38 (positive values)