Saving Channel Presets; Using The Sirius Menu - Pioneer Elite VSX-33 Operating Instructions Manual

Basic playback
• If after pressing SIRIUS the display shows Antenna
Error, try disconnecting the antenna and
1
reconnecting. If the display shows Check Sirius
Tuner, check the connection of the AC adapter and
this receiver to the SiriusConnect™ tuner.
After connecting, you will be able to use this receiver to
select channels and navigate categories using the GUI
2
screen display.
Selecting channels and browsing by genre
From the SIRIUS Channel Guide, you can browse SIRIUS
Radio channels in the order that they appear, or you can
narrow your channel search by genre.
Press / to enter the SIRIUS Channel Guide,
1
navigate through the channels one at time with /,
then press ENTER to listen to the SIRIUS radio
broadcast.
• To browse by genre, first press CATEGORY, use /
to select a genre, then press ENTER.
• To cancel and exit any time, press RETURN.
Tip
• You can select channels directly by pressing
D.ACCESS, then the three-digit channel number.
• You can press DISP to change SIRIUS Radio
information in the front panel display.
• The currently selected channel is automatically
chosen (without pressing ENTER) after five seconds.

Saving channel presets

This receiver can memorize up to 63 channels, stored in
seven banks, or classes (A to G) of nine channels each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre above.
2 Press T.EDIT.
The display shows a blinking memory class.
3 Press CLASS to select one of the seven classes, then
press / to select the channel preset you want.
You can also use the number buttons to select a preset.
4 Press ENTER.
After pressing ENTER, the preset class and number stop
blinking and the receiver stores the SIRIUS channel.
Note
1 You can check the strength of reception in Using the SIRIUS Menu below.
2 It's easiest if you have your TV switched on to take advantage of the GUI screens. You can, however, use just the front panel display to do
everything if you prefer.
3 You can reset the Channel presets and memory in Resetting the system on page 64.
4 You can reset the Channel Skip/Add, Parental Lock and Password settings in Resetting the system on page 64.
Tip
• You can also press MEMORY during reception
display to save the information of up to five songs.
See Using the SIRIUS Menu below to recall this
information.
Listening to channel presets
1 Press CLASS to select the class in which the channel
is stored.
Press repeatedly to cycle through classes A to G.
Press / to select the channel preset you want.
2
• You can also use the number buttons on the remote
control to recall the channel preset.

Using the SIRIUS Menu

The SIRIUS Menu provides additional SIRIUS Radio
4
features.
1 Press TOP MENU.
Use / to select a menu item, then press ENTER.
2
Choose from the following menu items:
• Channel Skip/Add – Use / and ENTER to select
channels you would like to remove/restore from/to
the channel guide.
• Parental Lock – Use / and ENTER to select
channels you would like to place under parental lock.
Channels put under parental lock are not displayed in
the Channel Guide, but may be accessed by directly
inputting their channel number and providing the
parental lock password.
• Antenna Aiming – Check the strength of satellite
and terrestrial reception.
3
• Memory Recall – Use / to browse your saved
song information (see Tip above).
• Password Set – Set the parental lock password.
3 When you're finished press TOP MENU to return to
the reception display.
05
49
En