Cadillac CTS2010 Owner's Manual page 59

Add Waypoint
Add: Select this screen button from
the Route screen. This feature allows
up to three waypoints to be added to
the current route, between one start
point and final destination. Once a
waypoint has been added, the points
can be edited or deleted.
To add a waypoint:
1. Press the DEST hard key.
2. Select the Add screen button.
This button only appears if a
route has been calculated.
3. Using the desired method of
entering a destination, enter
the waypoint. See "Destination"
previously for more information.
The system calculates and
highlights the route. The route is
now ready to be started.
4. To add more waypoints, press
the DEST hard key, then select
the Add screen button, where the
next waypoint should fall on the
route. The system calculates and
highlights the route. The route is
now ready to be started.
Infotainment System
To delete a waypoint:
1. Press the DEST hard key.
2. Select the Delete screen button
next to the waypoint to be
deleted.
3. The system displays a pop-up
confirmation message. Select
Yes to delete the waypoint; select
No to cancel this operation. The
system calculates and highlights
the route. The route is now ready
to be started.
Suspend Guidance
Press this screen button, from the
Route screen, to put the current
route on hold.
Resume Guidance
Press this screen button, from the
Route screen, to resume guidance
on the current route.
59