Information - Cadillac CTS2010 Owner's Manual

18 Infotainment System
DEL (Delete): Press to remove the
currently displayed category.
Restore CAT: Touch to restore a
category that was just removed
Restore All: Touch to restore all
categories that were removed.
Refresh: Touch to refresh the list
of stations.
When viewing a map screen, the
name of the station or channel
displays.
u t
SEEK / SEEK: Press the left
or right arrow keys to go to the next
or previous station and stay there.
Storing Radio Station Presets
This feature allows storage up
to 36 preset stations. AM, FM, and
®
XM (if equipped) can be mixed.
See AM-FM Radio on page 12
earlier in this section.
Sound Menu
For more information on setting the
tone, adjusting the speakers,
and automatic equalization, see
AM-FM Radio on page 12 earlier in
this section.
Digital Signal Processing (DSP)
If the system has Digital Signal
Processing (DSP), it is used to
provide a choice of five different
listening experiences. DSP can be
used while listening to the audio
system. The type of DSP selected is
displayed on the status screen.
Select from the following DSP
settings:
Normal: Select to adjust the audio
to be in normal mode. This provides
the best sound quality or all seating
positions.
Driver: Select to adjust the audio
to give the driver the best possible
sound quality.
Rear: Select to adjust the audio to
give the rear seat occupants the
best possible sound quality.
®
Centerpoint : Select to turn on
®
Bose Centerpoint . Centerpoint
produces a full vehicle surround
sound listening experience from
a CD, MP3/WMA, DVD, AUX
(auxiliary) input, or XM™ stereo
digital audio source and delivers
five independent audio channels
from the conventional two channel
stereo recordings. This is not
available for AM or FM.
5.1 Surround: 5.1 Surround
sound processing is available for
DVD-A/DVD-V sources that
were recorded in 5.1 surround.
•
5.1 Surround + Normal: Best for
all seating positions.
•
5.1 Surround + Rear: Best for
the rear seating position.
®