Information - Cadillac CTS2010 Owner's Manual

Digital Signal Processing (DSP)
If the system has Digital Signal
Processing (DSP), it is used to
provide a choice of five different
listening experiences. DSP can be
used while listening to the audio
system. The type of DSP selected is
displayed on the status screen.
Select from the following DSP
settings:
Normal: Select to adjust the
audio to be in normal mode.
This provides the best sound
quality or all seating positions.
Driver: Select to adjust the audio
to give the driver the best possible
sound quality.
Rear: Select to adjust the audio to
give the rear seat occupants the
best possible sound quality.
Radio Menu
Press the CONFIG key to enter
the menu screen, then press the
CONFIG key repeatedly until Radio
is selected or touch the Radio
screen button to make radio system
changes.
Additional Information Displayed
Touch the Additional Information
Displayed screen button to turn
station or channel information on
or off.
Infotainment System
Touch the On screen button to
receive information, when it
is available, for the following;
FM radio text information.
Touch the Off screen button to
receive no information.
Number of Preset Pages
Touch the Number of Preset Pages
screen button to change the number
of preset pages, 1 through 6. Each
preset page can contain six preset
stations. Touch the desired
numbered screen button.
Noise Compensation
Technology: Your Bose
vehicle includes Bose AudioPilot
noise compensation technology.
When turned on, AudioPilot
continuously adjusts the audio
system equalization, to compensate
for background noise, so that the
music always sounds the same at
the set volume level.
15
®
equipped
®
®