Philips HR6836 User Manual page 13

Furniture
72
Shampooing of upholstery and tapestry
- Attach the upholstery nozzle directly to the
handgrip (fig. 72).
• This nozzle is very convenient for
shampooing furniture, tapistry, curtains, etc.
(fig. 73).
Cleaning and maintenance
- Switch off. Remove the mains plug from the
wall socket.
- All parts of the appliance, including the
container, may be cleaned with a damp
cloth and if required some detergent.
However, ensure that no water enters the
motor part!
74
- Rinse the float unit with foam filter (fig. 74).
To guarantee optimum life time of your
foam filter, it is advisable to carefully
remove it from the
float unit (fig. 75)
and handwash the
filter separately
(fig. 76).
Please note: you
can squeeze the
foam filter, but do
not wring!
73
75
76
77
- The motor protection filter can also be
removed (fig. 77) and rinsed (fig. 78) for
cleaning.
Do not forget to replace the motor
protection filter!
79
- Rinse the Double Injection shampoo nozzle
(fig. 79).
You can remove the hard floors attachment
(fig. 80) and clean it separately.
- Fill the water reservoir with lukewarm clean
water. Pump the water out via the two
shampoo tubes into a water outlet (sink,
toilet). This will prevent shampoo
remainders to crystallize and clog inside the
tubes.
• To extend its life, the shampoo pump
should be cleaned with a mixture of water
and white distilled vinegar once a year.
- Pour 1 litre of white vinegar into the
shampoo container and fill it up with clean,
lukewarm water.
- Let the shampoo pump run in shampooing
position until the shampoo container is
empty. Collect the vinegar solution in a
bucket.
- Repeat this procedure with 1 litre of clean
water to rinse out any vinegar residues.
14
78
80
2
1