Philips HR6836 User Manual page 14

Replacement dustbags
paper dustbags
Replacement paper dustbags (sets of 4 pcs.,
type "Athena") are available at your dealer.
Please refer to type number HR 6947 or
service nr. 4822 015 70058.
Please note: One new motor protection filter
and one new Micro Filter are provided free
with each set of original Philips paper
dustbags.
cotton dustbag
Instead of the paper dustbags you can use
the cotton dustbag (HR 6983) (provided in
some countries). It can be emptied and used
repeatedly (refer to: "To remove a (full)
dustbag").
For removing and placing the cotton dustbag
simply follow the same instructions as those
for the paper bag.
Replacement motor protection filter
Replace the motor
protection filter (fig.
81) when placing the
first of a new set of
dustbags.
Never use the
appliance without
the motor protection
filter.
Replacement Micro Filter
When dry vacuum cleaning, the electrostatic
Micro Filter purifies the exhaust air by
removing miniscule dust particles.
In the course of time the efficiency of the filter
will decrease.
82
Normally, it suffices to replace the Micro Filter
(fig. 82, 83) when placing the first of a new
set of paper dustbags.
81
2
83
1
The indicator in the
Micro Filter holder
remains white.
If the filter has
become noticeably
grey (fig. 84) you may
decide to advance
filter replacement.
Especially if
pulmonary obstructive
disease or allergy (pollen, dust, etc.) occurs,
it may be advisable to replace the Micro
Filter more frequently.
To enable this, sets of Micro Filters are
available from your dealer under type nr. HR
6932 or service nr. 4822 015 70056.
Replacement Philips Cleaning liquid
Replacement bottles of cleaning liquid type
are available at your dealer.
Please refer to type number HR 6965 or
service nr. 4822 390 80176.
Replacement foam filter
Replace the foam filter if it is damaged or
very dirty.
A new foam filter is available from your
dealer under service nr. 4822 480 40242.
Storage
- Switch off.
- Remove the plug from the mains socket.
85
- Press the cord winder button. The mains
cable will be wound automatically inside the
appliance (fig. 85).
- The small nozzles can be stored as shown
in fig. 86.
15
84
86