Table of Contents
Advertisement
Pluto User Manual v1.38
CDL into A
and
Recall CDL into
Only one look should be selected for the
than one look selected no action is taken. Only the CDL values are recalled. The
slot is not loaded.
Note that you do not have to recall the CDL values into the same side that they
were in when the look was stored. In the example menu on the previous page,
the Pluto is in single-head mode and so all looks are recalled to the A side, even
Look number 58, which was stored from the B side. In dual-head mode you can
choose which side to recall into. This makes it very easy to copy a CDL from one
side to the other.
If you have one or more looks selected,
selected looks for deletion. This will stop them from being shown in the list, and
also stop them from appearing in the EDL/ALE files when the Look data is
uploaded to the GUI.
Note that the looks aren't actually deleted. They are only flagged for deletion.
This means that they are not removed from the Look database and, if you keep
marking and deleting, eventually the database will fill up and you won't be able
to mark any more looks.
the
Clear Data After Upload
with the
Clear All Look Data
menu of the OSD.
occasionally when the Look data is no longer needed.
Undo Last Deleted
from the
Delete Selected
deletion to correct a mistake. If you close the menu or mark any more looks you
can no longer undo the last deletion.
Pandora Technology
United Kingdom
B.
The only two ways to really clear the data are to check
checkbox in the GUI when uploading the data or
option in the Clear Memory SubMenu from the Setup
It is important that you select one of these options
will remove the Deleted flags that were most recently set
action. This can only be done immediately after the
sales@pandoratek.org
www.pandora-int.com
Recall CDL
function. If you have more
Delete Selected
Page 44 of 66
will flag all of the
October 2013
Advertisement
Table of Contents
