Table of Contents
Advertisement
Pluto User Manual v1.38
often Router address will be configured to connect to a DSL router or network
switch which will route traffic out to the internet. For our simple case where
Pluto is connected directly to a laptop PC there probably will not be a gateway
device however it is important that the setting for this is not left empty or
defaulted to e.g. 0.0.0.0.
We recommend that the gateway address is set to a matching Network address
and the Host Address set to "1" e.g. 192.168.0.1
3.2.2
Network Settings on the PC or Laptop
Open the network settings on your machine. On a Windows PC this can normally
be done by clicking on the small icon on the bottom right of the toolbar.
You can also do this from the system control panel.
Choose "open Network and Sharing Center" to see something like
And now select "Local Area Connection" ...
Pandora Technology
United Kingdom
this .........
sales@pandoratek.org
www.pandora-int.com
Page 11 of 66
October 2013
Advertisement
Table of Contents
