Selecting The Multi-Channel Analog Inputs - Pioneer VSX-D41 Operating Instructions Manual

05 Playing sources
Selecting the multi-channel
analog inputs
Connect a DVD player with 5.1 channel output
to listen to 5.1 channel playback.
1 Select DVD/LD if it is not already
selected.
Use the INPUT SELECTOR buttons on the
remote (or the MULTI JOG/INPUT SELECTOR
dial on the front panel).
2 Press SIGNAL SELECT (front panel)
repeatedly to select 5.1 ch.
To cancel 5.1 channel playback, use the SIGNAL
SELECT button to select an input signal (other
than DVD 5.1 ch).
• When 5.1 channel playback is selected,
you can't use the SIGNAL SELECT, INPUT
ATT, TONE, and MIDNIGHT/LOUDNESS
buttons, as well as the Standard, Advanced
Surround, and Stereo/Direct sound modes.
• When 5.1 channel playback is selected,
only the volume and channel levels can be
set.
28
En