Controls And Displays; Front Panel - Pioneer VSX-D41 Operating Instructions Manual

Controls and displays

Front Panel

1 2
STANDBY
STANDBY / ON
PHONES
8
1 STANDBY/ON
Switches the receiver between on and standby.
2 STANDBY indicator
Lights when the receiver is in standby mode.
3 STATION (+/–) buttons (pages 35–36)
Selects station presets when using the tuner.
4 TUNING (+/–) buttons (page 34)
Selects the frequency when using the tuner.
5 Remote sensor
Receives the signals from the remote control.
6 ENTER
7 MULTI JOG/INPUT SELECTOR dial
The MULTI JOG/INPUT SELECTOR dial
performs a number of tasks. Use it to select
options after pressing TONE CONTROL, QUICK
SETUP or TUNER EDIT.
8 PHONES jack
Use to connect headphones.
When the headphones are connected, there
is no sound output from the speakers.
3 4
ADVANCED STEREO/
STATION TUNING STANDARD SURROUND DIRECT
LISTENING MODE
TUNER EDIT CLASS BAND MPX INPUT ATT FL DIMMER
MULTI JOG
9 10 11 12 13 14 15 16
5
SIGNAL
MONITOR MIDNIGHT LOUDNESS TONE QUICK SETUP
SELECT
MULTI JOG
17 18 19 20 21
9 TUNER EDIT (pages 35–36)
Press to memorize and name a station for recall
using the station (+/–) buttons.
10 CLASS (pages 35–36)
Switches between the three banks (classes) of
station presets.
11 BAND (page 34)
Switches between AM and FM radio bands.
12 MPX (page 34)
Press the MPX button to receive a radio
broadcast in mono.
13 INPUT ATT
Use to attenuate (lower) the level of an analog
input signal to prevent distortion.
14 FL DIMMER
Use this button to make the fluorescent display
(FL) dimmer or brighter.
15 LISTENING MODE buttons
STANDARD (pages 24, 26, 33)
Press for Standard decoding and to switch
between the various Pro Logic II options.
ADVANCED SURROUND (pages 24, 26)
Use to switch between the various
surround modes.
6 7
N∫m-Û.,,
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
INPUT
SELECTOR
MULTI JOG
ENTER
MASTER VOLUME
DOWN UP
R
22
04
19
En