Ipod Messages; Usb Messages - Pioneer VSX-819H-S Operating Instructions Manual

Additional information

iPod messages

Symptom Cause
iPod/USB Error 1
There is a problem with the signal path from the
(I/U ERR1)
iPod to the receiver.
iPod/USB Error 2
The software version being used with the iPod
(I/U ERR2) needs to be updated.
An iPod not supported by this receiver is
connected.
iPod/USB Error 3
When there is no response from the iPod.
(I/U ERR3)
No Track
When there are no tracks in the category
selected on the iPod.

USB messages

Symptom Cause
iPod/USB Error 1
There is a problem with the signal path from the
(I/U ERR1) USB to the receiver.
iPod/USB Error 3
When there is no response from the USB.
(I/U ERR3)
iPod/USB Error 4
The power requirements of the USB device are
(I/U ERR4)
too high for this receiver.
Action
Switch off the receiver and reconnect the iPod to
the receiver. If this doesn't seem to work, try
resetting your iPod.
Update the software being used with the iPod
(please use the latest iPod software versions
later than the iPod updater 2004-10-20).
Connect the iPod supported by this receiver.
Update the iPod software to the latest version. If
this doesn't seem to work, try resetting your iPod.
Select a different category.
Action
Switch off the receiver and reconnect the USB to
the receiver.
Switch off the receiver and reconnect the USB to
the receiver.
Switch off the receiver and reconnect the USB to
the receiver.
12
69
En