The System Setup Menu; Making Receiver Settings From The System Setup; Manual Speaker Setup - Pioneer VSX-415 Operating Instructions Manual

The System Setup menu

Chapter 7:
The System Setup menu
VSX-515 model only
Making receiver settings from
the System Setup menu
The following section shows you how to make
detailed settings to specify how you're using
the receiver and also explains how to fine-tune
individual speaker system settings to your
liking.
RECEIVER
SLEEP
INPUT SELECTOR
DVD/LD DVD 5.1CH
CD-R/
CD TAPE/MD
ADVANCED
STANDARD SURROUND
TOP MENU
SYSTEM
SETUP
DVD
RECEIVER CONTROL
1 Press RECEIVER on the remote control,
then press the SYSTEM SETUP button.
2 Use (cursor left/right) to select the
setting you want to adjust then press ENTER .
• SP SETUP – Specify the size, number,
distance and overall balance of the
speakers you've connected (see Manual
speaker setup below).
• IN ASSIG. – Specify what you've connected
to the digital and component video inputs
(see The Input Assign menu on page 44).
• OTHER – Make customized settings to
reflect how you are using the receiver (see
The Other setup menu on page 45).
FL DIMMER INPUT ATT
TV/SAT DVR/VCR
FM AM
MIDNIGHT/
STEREO LOUDNESS
MENU
RETURN
ENTER
RECEIVER

Manual speaker setup

This receiver allows you to make detailed
settings to optimize the surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
These settings are designed to fine-tune your
system, but if you're satisfied with the settings
made in Using the Quick Setup on page 10, it
isn't necessary to make all of these settings.
1 Select SP SETUP from the System Setup
menu then press ENTER .
See Making receiver settings from the System
Setup menu above.
2 Use (cursor left/right) to select the
setting you want to adjust then press ENTER .
If you are doing this for the first time, you may
want to adjust these settings in order:
• SP SET – Specify the size and number of
speakers you've connected (see Speaker
setting below).
• X.OVER– Specify which frequencies will be
sent to the subwoofer (see Crossover
network on page 43).
• CH LEVEL – Adjust the overall balance of
your speaker system (see Channel level on
page 43).
• SP DISTN. – Specify the distance of your
speakers from the listening position (see
Speaker Distance on page 43).
07
41
En