Settings; Video Settings; Picture Settings; General Settings - Prestigio RoadRunner 140 User Manual

3. Settings

Before recording, you can set up the device according to your requirements.
- In video/picture preview mode, press [MENU] to enter video/picture
settings, press it again go the general settings, press it third time to exit.
- In setting list, use [ ]/[ ] to navigate the menu, press [OK] to get the
options and confirm the selection, press [MENU] to exit.

Video settings

• Resolution: Select the resolution of recorded video: 1080P HD 1920 x 1080, 1080P 1440 x 1080,
720P 1280 x 720, WVGA 848 x 480, VGA 640 x 480.
• Date stamp: Add date and time stamp onto videos.
• Motion detection: Turn on or off motion detection. If there is any motion detected while the car
engine is stopped, your car DVR will start recording automatically.
• Loop recording : Set the video duration (1, 3, 5 minutes or off) for loop recording. When the
microSD card is full, the device will delete the oldest unlocked video file automatically.

Picture settings

• Size: Select the picture image size from 12M, 10M, 8M, 5M, 3M, 2MHD, 1.3M, VGA.

General settings

In preview mode, press [MENU] twice to enter general settings.
• Format: Format the memory card.
Formatting will erase all your stored data. Back up your data before proceeding.
• Language: Choose your language.
• Power off: Set automatic power off when the device is not in use.
• Default : Restore to default settings.
• Frequency : For a given luminance, the frequency of light fluctuation that evokes a
sensation of flicker. Set a right flickering frequency to avoid horizontal stripe interference.
• Date/Time : Set date and time on device.
• Version : Display the current system version.
User Manual
RoadRunner 140
3
3