Maxi-Cosi CV308 User Manual page 6

6
Canopy
Press clips onto each side of the seat (Figure 6).
NOTE: You can extend the canopy by flipping out
the visor.
7
Bumper Bar
Insert posts on bumper bar into holes on frame
until you hear it "click" (Figure 7). Pull to confirm it is
assembled securely. IMPORTANT: Always secure the
child with the restraining straps.
To remove bumper bar press the release buttons while
lifting off (Figure 7a).
8
Parent Storage Pouch
Open hook and loop flaps. Push plastic clip down
(Figure 8) onto left upper side of frame (left from the
standpoint of one pushing stroller).
Hook loop around knob (Figure 8). Secure hook and
loop flaps around the frame (Figures 8a and 8b).
To Use
4
Clip
7
8
Visor
6
8a 8b
Release
Button
7a