Initial Setup - Monogram JXSOUSV1 Owner's Manual

Initial Setup

1. Charge the Precision Cooking Probe using the
2. Locate the input connector jack on the bottom
3. Connect the Bluetooth
4. Power on the Precision Cooking Probe by
5. Wait 5-10 seconds while the devices join. Once
6. CONGRATULATIONS! Setup is complete.
provided Micro USB cable and a computer or
USB charger (not included).
side of the cooktop. It can be found in the front
left corner.
Module. Stick the
®
module to the bottom of the cooktop. It
contains magnets which will allow it to adhere
to the bottom of the cooktop.
pressing and holding the Power button for 3
seconds. The Bluetooth Indicator will turn on
®
and flash 3 times.
the joining process is complete the Bluetooth
Module indicator shall turn on solid and the
Precision Cooking Probe Indicator shall flash
once every 5 seconds.
Using Your Cooktop
Precision Cooking Probe
Side View of Cooktop
®
Input Connector Jack Located
on Bottom Side of Cooktop
Ethernet Cable Connector
on the Bluetooth Module
®
9