Tuner; Error Messages; Glossary - Pioneer SX-SW570 Operating Instructions Manual

09 Additional information

Tuner

Problem
Considerable noise in
radio broadcasts.
Auto tuning does not
pick up some stations.

Error Messages

Message
2CH ONLY
96K
MUTING
EXIT
NOISY
ERR MIC
ERR SP
EEP ERROR
NO SPTYP

Glossary

Dolby Digital
Dolby
Pro Logic II
34
En
Remedy
• Connect the AM antenna (refer to Connecting up) and adjust the direction and position for best
reception. You may also connect an additional internal or external AM antenna (refer to Connecting
external antennas on page 27).
• Fully extend the FM wire antenna, position for best reception, and secure to a wall. You may also
connect an outdoor FM antenna (see Connecting external antennas on page 27).
• Turn off other equipment that may be causing the noise or move it further away.
• The tuning interval is incorrect for your country or region. See Changing the frequency step on
page 24 to switch the tuning interval.
• The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more
sensitive tuning, connect an outdoor antenna.
Description
• An operation is prohibited because it is only applicable to 2 channel sources, while the current
source is a multichannel source.
• An operation is prohibited because the source is 96 kHz digital.
• An operation is prohibited because the sound is muted (press MUTE).
• Appears when a menu is automatically exited after a set period of inactivity.
• Background noise is too high to complete MCACC setup successfully.
• An error occurred during MCACC setup because the microphone is not connected or is not
connected properly.
• An error occurred during MCACC setup because the speakers are not connected or are not
connected properly.
• Contact your Pioneer authorized service center or your dealer for servicing.
• Try switching the unit off then on again. If the error still appears, please contact a Pioneer
authorized service center or your dealer.
A multi-channel audio
encoding system developed
by Dolby Laboratories that
enables far more audio to be
stored on a disc than PCM
encoding.
A matrix decoding technology
developed by Dolby
Laboratories that expands any
two-channel source audio,
such as CDs and TV
broadcasts, to a five-channel
playback (left/center/right/left
surround/right surround),
resulting in a surround
experience.
DTS
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are
trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are registered
trademarks of DTS, Inc.
A multi-channel audio
encoding system developed
by DTS that enables far more
audio to be stored on a disc
than PCM encoding.