Wall Mounting The Display Unit; Using This System For Tv Audio - Pioneer SX-SW570 Operating Instructions Manual

02 Connecting up
6 If you have a DVD player or other source
component you want to connect, connect it now before
connecting the power cord in the next step.
See Connecting auxiliary components on page 27 for how
to connect a digital source component.
7 Connect the power cord.
• Connect the power cord to AC inlet on the receiver
subwoofer. Connect the power cord to a wall socket.

Wall mounting the display unit

It is possibe to mount the display unit on the wall.
Before mounting:
• Remember that the display unit is heavy and could
cause the wood screws to work loose, or the wall
material to fail to support it, resulting in the display
falling. Make sure that the wall you intend to mount
the display on is strong enough to support it. Do not
mount on plywood or soft surface walls.
• Mounting screws are not supplied. Use screws that
are suitable for the wall material and that will support
the weight of the display.
• Pioneer bears no responsibility for accidents resulting
from faulty assembly or installation, insufficient
mounting strength of walls or other building fixtures,
misuse or natural disasters.
• If you are unsure of the qualities and strength of the
wall, consult a professional for advice.
3/32 in. (2.5 mm)
Note
1 Make sure to connect a TV or monitor (for video sources) to take advantage of this system's home theater potential. Please refer to the
instruction manual supplied with your TV or monitor for connection details.
2 • Do not use any power cord other than the one supplied with this system.
• Do not use the supplied power cord for any purpose other than connecting to this system.
14
En
1
2
1
7 / in.
8
(181 mm)
Mounting screw
(not supplied)

Using this system for TV audio

If your TV has a stereo audio output you can connect it to
this system and enjoy surround TV sound.
Important
• When connecting this system, be sure to switch
power off and disconnect the power cord from the
wall socket. Connect the power cord to the wall
socket only after completing all other connections.
AUDIO INPUT
ITAL
TV PC/GAME
TICAL) (OPTICAL)
SYSTEM CONNECTOR CONTROL
OUT
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
AC IN
1 Connect the audio output jacks on your TV to the
5/32 in.
(4 mm)
AUX input jacks on the receiver subwoofer.
Use the red/white stereo audio cable (not supplied) for
3/8 in.
(10 mm)
this connection. Make sure you match the left and right
outputs with their corresponding inputs for correct
stereo sound.
• You can use the AUX input jacks for any analog
source you want, such as a tape deck, etc.
ANALOG
AUX
L
FM UNBAL 75 AM LOOP ANTENNA
MCACC
SETUP MIC CONTROL IN AUDIO INPUT
DIGITAL ANALOG
SPEAKERS
DVD DTV PC/GAME
AUX
R (COAXIAL) (OPTICAL) (OPTICAL)
SUBWOOFER R SURROUND L
L
R
R L
CENTER FRONT
To stereo audio outputs
TV
1