Disassembly - JVC TH-M45 Service Manual

3.1 Main body section
3.1.1 Removing the metal cover
(See Figs.1 to 4)
(1) From the right and left sides of the main body, remove the
four screws A attaching the metal cover. (See Figs.1 and
2.)
(2) From the back side of the main body, remove the three
screws B attaching the metal cover. (See Fig.3.)
(3) Lift the rear section of the metal cover in the direction of the
arrow while extending the lower sections of the metal cov-
er, release the claws a using a longer screwdriver from the
inside as required. (See Fig.4.)
Note:
Do not damage any parts and boards inside the main body
when releasing the joints a using a longer screwdriver.
1-8 (No.MB033)
All manuals and user guides at all-guides.com
SECTION 3

DISASSEMBLY

Metal cover
A
Fig.1
Metal cover
A
Fig.2
B
Fig.3
Claws a Claws a
Fig.4
Metal cover
Rear panel
Metal cover