JVC TH-P5B Service Manual page 9

3.1.3 Removing the power supply board
(See Fig.6)
CAUTION:
When remove the power supply board, do not touch the
capacitor (C905) because it keep voltage.
(1) Disconnect the parallel wires from connectors CN101,
CN421 and CN422 on the main board.
(2) Disconnect the power cord connector
supply board.
(3) Remove the four screws E attaching the power supply
board.
(4) Release the power supply board from fastener.
CN901 on the power
CN901
E E
fastener
CN401
E
CN403
CN404
Fig.6
(No.MB512<Rev.002>)1-9
C905