Philips 65BDL3000Q User Manual page 41

65BDL3000Q
How to setup the settings in the menu to
control all the monitors at the same time and
individually via RC?
How is the RC working?
Daisy chained by RS232 and no IR cable
Daisy chain : no RS232 connected and IR cable
32
1. The first display sets as "Primary" on OSD
(Advanced option/IR control item), others set as
"Secondary".
2. The setup OSD will show on Top-Left of display.
(Toggle MENU will show again if it disappear)
3. Default setting: ID NO: 0, GP NO: 0, this setting
can control all displays by IR.
The "+", "-" can change "ID NO" to control
signal display by "Monitor ID".
The "UP", "DOWN" can change "GP NO" to
control multi-display by "Group ID".
*The first display always be controlled by IR.
No need setting, just to connect with IR cables
and control by IR.
*This way has out-of-synchronizm phenomenon.
Suggest to use above setting with RS-232 cable.