Table of Contents
Advertisement
Mouse
What should I do if my computer does not recognize my mouse?
❑ Make sure your mouse is securely plugged into the port.
❑ Restart your computer with your mouse connected.
IRX-4590_BGN
❑ If you have disabled the USB ports in the BIOS setup screen, you cannot use the mouse connected to one of the USB
ports on your computer. To enable the ports, follow the steps and the tip in Disabling Built-in Devices
❑ If the use of USB ports is restricted by the USB Access Restriction Setting utility, you cannot use the mouse connected
to one of the USB ports on your computer. To change the setting, see Restricting USB Access
IRX-4590_END
What should I do if the pointer does not move when I use my mouse?
❑ Make sure another mouse is not connected.
❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.
❑ If the Alt+F4 keys do not work, press the Windows key once and then the , key several times, select Restart with the
M or m key, and press the Enter key to restart your computer.
❑ If your computer does not restart, press the Ctrl+Alt+Delete keys, select the arrow next to the Shut down button with the
m and , keys and then Restart with the M or m key, and press the Enter key to restart your computer.
❑ If this procedure does not work, press and hold the power button until the computer turns off.
!
Turning off your computer with the power button may cause loss of unsaved data.
n
174
N
Troubleshooting
(page
115).
(page
116).
Advertisement
Table of Contents
