Table of Contents
Advertisement
3
Click Change advanced power settings.
4
Select the Advanced settings tab.
5
Double-click Wireless Adapter Settings and Power Saving Mode.
6
Select Maximum Performance from the drop-down list both for On battery and Plugged in.
IRX-4590_BGN
❑ If you have disabled the wireless LAN function in the BIOS setup screen, you cannot connect to wireless access points.
To enable the function, follow the steps and the tip in Disabling Built-in Devices
IRX-4590_END
What should I do if I cannot access the Internet?
❑ Check the access point settings. See the manual that came with your access point for more information.
❑ Make sure your computer and the access point are connected to one another.
❑ Move your computer away from obstacles or closer to any access point you may be using.
❑ Make sure your computer is properly configured for Internet access.
❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting
any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot
connect to a wireless LAN access point?
IRX-4590_BGN
❑ If you have disabled the wireless LAN function or the network (Ethernet) port in the BIOS setup screen, you cannot access
the Internet through a wireless or Ethernet network. To enable the function or the port, follow the steps and the tip in
Disabling Built-in Devices
IRX-4590_END
(page 156)
(page
115).
(page
to change the settings.
n
Troubleshooting
115).
157
N
Advertisement
Table of Contents
