To The Computer - Sony VAIO VGN-GS Series User Manual And Instruction Manual

6 Press the M or m key to select your desired priority under Boot Priority and press the Enter key.
7 Press the M or m key to select the device to which you want to assign the priority and press the Enter key.
Except IRX-4590_END
8 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Why doesn't my screen turn off after the automatic turn-off time has passed?
The VAIO original screen saver disables the timer setting, which you can select using the Windows power options, for your
screen to turn off.
Select a screen saver other than the VAIO original screen saver.
What should I do if I cannot boot my computer from the USB floppy disk drive connected

to the computer?

To boot your computer from the USB floppy disk drive, you need to change the boot device.
Turn on your computer and press the F11 key when the VAIO logo appears.
US model_BGN
How do I reduce the volume of the recovery partition?
Your built-in storage device* contains the recovery partition where data for the system recovery is stored. If your computer
includes a built-in flash memory storage drive, you might want to reduce the volume of the recovery partition by following
these steps:
Except GVD model_BGN
* See the online specifications to find out about your storage device configuration.
n 149 N
Troubleshooting