Setting The Automatic Answering; Setting The Automatic Rejecting; Displaying Bd (Bluetooth Device) Address; Displaying Bd Address Of Your Cellular Phone - Pioneer DEH-P55BT Operation Manual

Section
Bluetooth Telephone
08
Setting the automatic
answering
If this function is on, this unit automatically
answers all incoming calls.
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1, P1) appears in
the display, then press FUNCTION to select
AUTO ANSWER.
After phone user setting is displayed, press
FUNCTION until AUTO ANSWER appears in
the display.
2 Push MULTI-CONTROL up to turn auto-
matic answering on.
AUTO ANSWER :ON appears in the display.
# To turn automatic answering function off,
push MULTI-CONTROL down.
Note
If both the automatic reject and automatic an-
swer functions are set to ON, the automatic reject
is prioritized and all incoming calls are automati-
cally rejected.
Setting the automatic
rejecting
If this function is on, this unit automatically re-
jects all incoming calls.
! Even if you rejected an incoming call, the
call record is memorized in missed call his-
tory list.
! This feature cannot be set for each different
user phone.
1 Press FUNCTION to select
REFUSE CALLS.
Press FUNCTION until REFUSE CALLS ap-
pears in the display.
44
En
2 Push MULTI-CONTROL up to turn auto-
matic call rejection on.
REFUSE CALLS :ON appears in the display.
# To turn automatic call rejection off, push
MULTI-CONTROL down.
Displaying BD (Bluetooth
Device) address
Each device featuring Bluetooth wireless tech-
nology is allocated a unique 48-bit device ad-
dress. Each device address consists of a 12-
digit of hexadecimal string.
You can display the BD address of your cellu-
lar phone and this unit.
Displaying BD address of your
cellular phone
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1) appears in the
display, then press FUNCTION to select one
of the phone user settings.
After phone user setting is displayed, press
FUNCTION until the desired phone user set-
ting (e.g., PHONE 1) appears in the display.
2 Press DISPLAY to display the BD ad-
dress.
12-digit hexadecimal string is displayed.
# To return to the device name, press DISPLAY
again.
3 Press BAND to return to the standby
display.