Standby Mode; Displaying Device Name; Introduction Of Advanced Hands-Free Phoning Operation; Operating The Hands-Free Phoning Menu - Pioneer DEH-P55BT Operation Manual

Section
Bluetooth Telephone
08
2 Press ON HOOK to end the call.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
# You may hear a noise when you disconnect
the phone.
Rejecting an incoming call
You can reject an incoming call. If you want to
set this unit to automatically rejecting all in-
coming calls, refer to Setting the automatic re-
jecting on page 44.
% When a call comes in, press ON HOOK.
The call is rejected.
Note
The rejected call is recorded in missed call history
list. About the missed call history list, refer to
Using the Call History on page 41.

Standby mode

Standby mode lets you use the various func-
tions related to hands-free phoning. For more
details, refer to Introduction of advanced
hands-free phoning operation on this page.

Displaying device name

You can display the device name of cellular
phone currently connected to this unit.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Calendar—device name
# When NO CONNECTION is displayed, you
cannot use DISPLAY.
34
En
Introduction of advanced
hands-free phoning operation
Operating the hands-free
phoning menu
1 1 1 1
1 Function display
Shows the function status.
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions:
PHONE BOOK LIST (phone book)—
MISSED LIST (missed calls)—DIALLED LIST
(dialled calls)—RECEIVED LIST (received calls)
—PRESET DIAL LIST (preset phone number)
—NUMBER DIAL (call by entering number)—
REFUSE CALLS (automatic reject setting)
# When NO CONNECTION is displayed, no
functions, except REFUSE CALLS, can be se-
lected.
# If guest phone is connected to this unit via
Bluetooth wireless technology,
PHONE BOOK LIST cannot be selected.
# If cellular phone is connected to this unit via
Bluetooth wireless technology with HSP (Head
Set Profile), you cannot operate any functions in
this menu.
# To return to the standby display, press BAND.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the standby display.