Table of Contents
Advertisement
NOTE: Remember that not all members of the talk
group are receiving your message. Missing
members will start receiving your message as
channels become available.
6.14.3 SITE TRUNKING
Site trunking occurs when a site can no longer
participate in wide area trunking. When site trunking
is occurring, the radio searches for other sites that may
provide wide area coverage. Site trunking ends when a
wide area coverage site is located, the current site is
operating again as a wide area coverage site, an out-of-
range condition occurs, or the failsoft mode is entered.
6.14.4 DETERMINING CURRENT SITE AND
SEARCHING FOR NEW SITE
To display the RSSI level of the current site, press
the Site Search option switch or select that menu
parameter. The display then indicates the current site
7.1 SUPERVISORY TONES
Single Beep (Alert Tone)
•
Power was turned on and a successful power-up
sequence occurred (Section 3.1).
•
The time-out timer is about to expire or the penalty
timer has expired (Section 4.3).
•
The conversation timer is about to expire (Section
5.7).
•
The system received your page but the paged mobile
is not on the air (Section 6.7).
•
Telephone interconnect is not operational (Section
6.6).
Continuous Tone (Invalid Condition)
•
A transmission is being attempted on a conventional
channel programmed as receive-only.
•
The transmitter is disabled by the busy channel
lockout feature (Section 5.4).
SECTION 7 MISCELLANEOUS
44
number as "SITE xx" and the RSSI level as "RSSI
xx". This mode is then automatically exited.
To scroll through the other programmed sites,
press and hold the Site Search option switch while
"SITE xx" or "RSSI xx" is displayed. If site lock is on
when site search is entered (see following), the radio
will be locked on the new site when this function is
exited.
6.14.5 LOCKING/UNLOCKING A SITE
It is sometimes desirable to stay on a site. To
prevent the transceiver from searching for a new site,
lock it on the current site by pressing the Site Lock
option switch or selecting that menu parameter. The
display then momentarily indicates the site alias to
indicate that the current site is locked ("x" is the
current site number). To unlock the site, press the Site
Lock switch again or the F2 (Select) key and
"UNLOCK" is momentarily displayed.
•
The transmitter has been disabled by the time-out
timer feature (Section 4.3).
•
The transmitter has been disabled by the conversa-
tion timer (Section 5.7).
•
An out-of-range condition exists (SMARTNET/
SmartZone and P25 trunking only).
•
A transmission is being attempted before the penalty
timer has expired (Section 5.6).
•
Dynamic regrouping has been exited but the
dynamic regrouping channel is still selected
(Section 6.13).
Single Short Medium-Pitch Tone
•
A valid key has been pressed.
Single Short Low-Pitch Tone
•
An invalid key has been pressed.
MISCELLANEOUS
Advertisement
Table of Contents
