CDA PC870 Installation, Use And Maintenance Manual page 25

• Locate the appliance in a well ventilated position, away from heat
sources, damp and direct sunlight.
• Ensure that there is a gap of no less than 10cm above and to the
sides of the appliance to allow for ventilation. The clearance
between the sides and adjacent furniture must also allow the doors
to open fully. Note that a greater side gap will be required if the
appliance is to be positioned next to a wall to allow the doors to
open fully (fig. 5).
• A gap of 5cm must be allowed for ventilation between the rear wall
and the back of the appliance.
This appliance is not intended for use at altitudes exceeding 2000
metres.
25