CDA PC870 Installation, Use And Maintenance Manual page 14

Eco light mode
This appliance is also equipped with a function which allows you to
switch off the interior lights for when the doors are opened. This is
for cases where exterior illumination is sufficient enough to see the
appliance's contents and provides lower overall power consumption.
To switch the eco light mode on
• Touch and hold 'Eco light mode sensor' (17) for approximately three
seconds. The eco light mode indicator (7) should illuminate and the
internal lights will no longer come on when the doors are opened.
To switch the eco light mode off
• Touch and hold the 'Eco light mode sensor' (17) for approximately
three seconds. The 'Eco light mode indicator' (7) should extinguish
and the internal lights will now come on when the doors are
opened.
NOTE: If the appliance emits a double-beep when trying the above
steps, do not touch the control panel for a few seconds and then
try again.
14