Operating The Picture Adjustment; Switching The Backlight On/Off - Pioneer AVIC-Z1 Operation Manual

❒ When AV is selected, the following restric-
tions are applied to "Rear display".
— The "Video image" and sound are output
only when the AV INPUT has them.
— The "Video image" and sound are output
only when the appropriate setting on [AV
Input] is [Video].
Operating the picture adjust-
ment
• For safety reasons, these functions are not
available while your vehicle is in motion.
To enable these functions, you must stop
in a safe place and put on the parking
brake before setting your route (see page
18 Interlock for details).
You can adjust for each source and rear view
camera.
1
Press the V button to display Picture
Adjust screen.
• Brightness — Adjusts the black intensity
• Contrast — Adjusts the contrast
• Color — Adjusts the color saturation
• Hue — Adjusts the tone of color (red is
emphasized or green is emphasized)
• Dimmer — Adjusts the brightness of dis-
play
• Back-Camera — Shows the picture adjust-
ment display for the rear view camera
❒ Touching [Source] while adjusting the
rear view camera image returns you to the
previous screen.
❒ The adjustments of Brightness, Contrast
and Dimmer are stored separately when
your vehicle is headlight is on (daytime)
and when your vehicle's headlight is off
(nighttime). These are switched automati-
cally depending on the condition of the
vehicle's headlight.
158
❒ You cannot adjust Color and Hue for the
source without a video and navigation map
display.
❒ The setting contents can be memorized
separately for the following screen and the
"Video image".
— AM/FM/M-CD/iPod/AUX/XM/SIRIUS
screen
— LIBRARY (Music Library) screen
— Built-in DVD drive
— TV image
— AV Input/EXT
— Rear view camera image
— Navigation map and menu screen
❒ The picture adjustment may not be able to
be used with some rear view cameras.
❒ Because of the LCD screen characteris-
tics, you may not be able to adjust the
screen at low temperatures.
2
Touch [+] or [–] to adjust the desired
item.
Each time you touch [+] or [–] increases or
decreases the level of desired item.
3
Touch [ESC] to return to the previous
screen.

Switching the Backlight On/Off

By turning off the backlight of the LCD screen,
you can turn off the screen display without turn-
ing off the voice guidance.
1
Press and hold the V button.
The backlight turns off, and the screen turns
off.
❒ Press the V button once again to turn on
the backlight, and the screen is displayed.