Connecting To The Phone Line - Samsung SF-530 series User Manual

1.14
Getting Started
Notes:
• There is a one-touch plate built under the handset cradle. You can use
this plate with the supplied one-touch label sheet. Write information on
the label up to 10 items to remind you where the most frequently used
number is stored and attach the label on the plate.
To find the desired number, rotate
the plate away from the cradle, and
slide it under the cradle after using
it.
• If you want to remove the cradle,
while pushing up the part A , on
the bottom of the cradle, slide the
cradle down, then take it out.

Connecting to the Phone Line

For proper operation, the SF-530 series must be connected to the wall
jack. Once you have decided which wall jack you will be using, check a
box below and follow the instructions.
I only have one phone line coming to this wall jack. (This
includes two phone numbers on one line with distinctive ring service.)
Go to "To Connect to a Wall Jack that Has Only One Phone Line" on
next page.
I have two phone lines coming to this wall jack. Go to "To
Connect to a Wall Jack that Has Two Phone Lines" on page A.2.