Table of Contents
Advertisement
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices
The M mark is intended to be synonymous
with the U mark. The T mark is intended to
be synonymous with the UT mark.
The M and T marks are recommended
by the Alliance for Telecommunications
Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of
the FCC Rules.
The HAC rating and measurement
procedure are described in the American
National Standards Institute (ANSI) C63.19
standard.
To enter that the Hearing Aid Compatibility
rating for your phone is maintained,
secondary transmitters such as Bluetooth
and WLAN(this phone does not have
WLAN) components must be disabled
during a call. See page 118 for instructions
to disable these components.
For information about hearing aids and
digital wireless phones
Wireless Phones and Hearing Aid
Accessibility http://www.accesswireless.
org/
FCC Hearing Aid Compatibility and
Volume Control http://www.fcc.gov/cgb/
consumerfacts/hac_wireless.
html
WiFi Caution!
This device is capable of operating in
802.11a/n mode. For 802.11a/n devices
operating in the frequency range of 5.15
- 5.25 GHz, they are restricted for indoor
operations to reduce any potential
harmful interference for Mobile Satellite
Services (MSS) in the US.
WiFi Access Points that are capable of
allowing your device to operate in
802.11a/n mode (5.15-5.25 GHz band)
are optimized for indoor use only.
If your WiFi network is capable of
operating in this mode, please restrict
your WiFi use indoors not to violate
federal regulations to protect MSS.
31
Advertisement
Table of Contents
