Controls And Displays; Remote Control - Pioneer XW-NAS5 Operating Instructions Manual

02

Controls and displays

Chapter 2:
Controls and displays

Remote control

STANDBY/ON
1
SOUND
SCAPE
2
SELECT
PRESET
3
4
SLEEP
5
CLOCK
6
 STANDBY/ON
1
Switches the unit between standby and on.
2 Soundscape function/operation buttons
Use to turn the Soundscape (environmental
sound) function ON/OFF, and to switch
between settings (page 19).
3 PRESET +/–, Playback control buttons
Use to select preset radio stations (page 18).
Use when operating an iPod or Bluetooth
wireless technology device with this remote
control (page 12, 16).
4 BASS/TREBLE
Use the bass and treble controls to adjust the
overall tone.
Note
1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT,
8
En
7
INPUT
VOLUME
8
ON/
OFF
MIX BALANCE
PRESET
9
ENTER
TUNE
BASS/
WAKE
TREBLE
UP
10
TUNE
TUNER
SETUP
PRESET
5 SLEEP
Use to put the receiver in sleep mode and
select the amount of time before sleep
(page 22).
WAKE UP
Use to turn the wake-up timer function ON/
OFF (page 22).
CLOCK
Use to switch the clock display functions
(page 21).
6 SETUP
Press to make various settings.
7 INPUT
Use to select an input source. Press repeatedly
to switch between iPod, tuner, Bluetooth
1
ADAPTER and external input.
8 VOLUME +/–
Use to set the listening volume.
9 ENTER
10 TUNE +/–
Use to find radio frequencies (page 18).
TUNER PRESET
Use to store preset ratio stations in
memory, and to call them from memory
(page 18).
cannot be selected even if INPUT is pressed.