Table of Contents
Advertisement
Available languages
Available languages
07
Sound settings
•
– Vinyl record sounds. Enjoy the
sound of scratches and hisses from a vinyl
record mixed with music from iPod, radio
tuner, or other external input source. (Even
greater effect is achieved when combined
with Low Fidelity sound mode.)
When mixed with music, even new tracks
produce a retro feel like looking at a sepia-
toned photograph.
Using the sound effects
You can add exciting effects to audio sources.
• Default setting:
PRESET
SLEEP
CLOCK
1
Press SETUP.
Use / to select '
2
ENTER.
Use / to switch Sound modes, then
3
press ENTER.
•
(Auto Level Control) – This unit
equalizes playback sound levels.
•
(Low Fidelity) – Produces a retro-feel
to music play.
•
(Vivid) – Produces a sharpened
effect similar to that experienced at a live
concert.
•
(OFF) –
20
En
(OFF)
PRESET
ENTER
TUNE
BASS/
WAKE
TREBLE
UP
TUNE
TUNER
SETUP
PRESET
', then press
Revert sound to its natural state.
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone.
1
Press BASS/TREBLE.
Use / to select '
2
'
' (Treble), then press ENTER.
Use / to adjust the bass or treble, then
3
press ENTER.
You can adjust low and high sounds on a scale
of –6 to +6.
Using the Sound Retriever
When audio data is removed during the WMA/
MP3/MPEG-4 AAC compression process,
sound quality often suffers from an uneven
sound image. The Sound Retriever feature
employs new DSP technology that helps bring
CD quality sound back to compressed by
restoring sound pressure and smoothing
jagged artifacts left over after compression.
• Default setting:
1
Switch the unit into standby.
2
Press SETUP.
Use / to select '
3
ENTER.
Use / to switch the sound retriever on
4
or off.
5
Press ENTER.
When the setting is completed, the newly set
value flashes for 3 seconds, then the power
returns to standby mode.
' (Bass) or
(ON)
', then press
Hide quick links:
Advertisement
Chapters
Table of Contents
