Controls And Displays; Top And Front Panel; Rear Panel - Pioneer IDK-01 Operating Instructions Manual

Controls and displays

Chapter 2
Controls and displays

Top and front panel

1
1 iPod connector port
Insert your iPod dock connector port to
connect and recharge your iPod unit.
2 iPod type adapter pocket
Holds the iPod type adapter that matches your
iPod unit.
3 Power indicator
Lights when your iPod is connected to the dock
connector port.
4 Remote sensor
See Range of the remote control unit on page 5
for more on this.
Note
1 If you have connected an SR cable to this terminal, you must point the remote control supplied with this unit at the remote
sensor of the connected receiver or amplifier.
2
3 4

Rear panel

IN
CONTROL S - VIDEO VIDEO
1 2 3
1 CONTROL IN terminal
Connect this to a Pioneer AV receiver (or
similar component) CONTROL OUT terminal
using the supplied SR cable. This allows you to
use the receiver's remote to control this unit.
Check your Pioneer receiver's operating
instructions for more on this.
2 S-VIDEO output terminal
Use to connect an S-video cable to your TV/AV
receiver to view the on-screen display or for
higher quality iPod video playback (no video is
output to the VIDEO terminal if you make this
connection).
3 VIDEO output terminal
Connect a standard (composite) video cable to
your TV/AV receiver to view the on-screen
display or for iPod video playback.
4 AUDIO output terminal
Use to connect a stereo RCA/phono terminal
cable to your AV receiver /power amplifier for
two-channel audio.
5 AC adapter DC IN 12 V terminal
Use to connect the AC adapter to an AC power
outlet.
OUTPUT
DC IN 12 V
R AUDIO L
4 5
1
02
7
En