Extension Switch Time; System Setup; Door Calling/Pedal Control For Talk - Kenwei E705FC Instructions Manual

Operation
Storage
Note: Please stop monitoring CCTV camera within 24h when you setup the item manually off.

9.6 Extension Switch Time

Under function setup interface, choose the "AUX.TIME" item by touching
setup the extension time between 3/10/20/30s. The unit is default to 3s.
Storage
16
AWAY SET OFF
MUTE SET OFF
Help KEY SOUND ON
OPEN TIME 3S
CCTV TIME MANUAL
AUX. TIME 3S
MANUAL 10M 12H
, then touch
AWAY SET OFF
MUTE SET OFF
Help KEY SOUND ON
OPEN TIME 3S
CCTV TIME MANUAL
AUX. TIME 3S
3S 10S 20S 30S

10.System Setup

Under main menu interface, touch
function setup interface.
nd
10.1 2 Door Calling / Pedal Control for Talk
nd
/ to 2 calling and pedal activity is following the outer switch.
Under system setup interface, choose 2ND/PEDAL CTRL, touch
nd
choose turn on 2 door calling or pedal control for talk.
nd
Note: 1. The 2 door calling and pedal control for talk function cannot be opened at the same time.
2.The factory setting is defaulted to turn on 2 door calling function. But you need to connect with a
Calling switch to reach this function.
When you turn on 2 door calling mode
1. When the room station is under standby mode, it will sound the ringtone when 2 door calls.
2. When the room station is under talk or monitor mode, it will not sound the ringtone but with
on the screen when 2 door calls.
/ to choose SYSTEM , then touch
2ND / PEDAL CTRL
ROOM NO. SET
Storage Help MUSIC SET
TIME 20XX/01/01 01:00
RESET
LANGUAGE
2ND
(Optional)
nd
nd
nd
Operation
to enter into
2ND
1
ENGLISH
PEDAL
to confirm, then you are able to
nd
icon
17