Table of Contents
Advertisement
Operation
1. ON / OFF
a.After connecting the power supply, the unit will sound "DI" with LED flashes, then power LED
turns red, which means the unit is powering on and in standby mode.
b. Under standby mode, touch and hold
means the unit is under off mode.
Under off mode, touch
to directly enter into standby mode.
Note: No sound when you have setup the mute mode.
2.Call Remind
a.When the door station calls in, room station screen will display its image automatically.
b.When the room station is talking with door station, and another door station calls, the screen will
display
icon and no ringing.
3.Talk / Stop
3.1 Call Transfer To Talk
When the door station rings, touch
to start talk. (You need to pickup the handset to talk when
you use E705FC)
3.2 When the room station is in monitor mode, touch
Note:Refer to operation 4.1 for Monitor operation.
10
, till it sounds "DI", then power LED
turns off, which
to start talk.
3.3 Standby Transfer To Talk
Under standby mode, touch
to start talk with Door 1.
3.4 Transfer Call
When the room station is talking with door station, touch and hold
need to transfer the call, then touch
to transfer call. Now the second room station sounds the
ring, touch
to start talk. Other room stations enter into busy mode.
3.5
Hang up
Under talk mode, touch
to exit talk. Or you can wait 90secs , it will automatically exit.
4.Monitor
4.1 Monitor Door Station
Under standby mode, touch
to monitor Door 1. The monitoring channel would be DOOR
1/DOOR2/EXIT when you repeatedly touch the button. No image for Door 1 when the system only
connect with Door 2.
Operation
to choose room number you
11
Hide quick links:
Advertisement
Table of Contents
