Room Number Setup; Ringtone Setup - Kenwei E705FC Instructions Manual

Operation
st
Calling from 1 door (the outdoor unit)
When you turn on pedal control for talk mode
1. When the system connects with 2pcs door station, under standby mode, step on the pedal control
switch to monitor Door 1. Step again to monitor Door 2. Step it third time the room station will enter
into standby mode.
2.When the system only connects with 1pc door station, under standby mode, step on the pedal
control switch to monitor door station, step again the room station will enter into standby mode.
3.When door station rings, step on the pedal control switch to talk, step again to stop talk and go back
to standby mode.

10.2 Room Number Setup

Under system setup interface, choose ROOM NO., touch
room number between 1 /2/3/4.
18
nd
Calling from 2 door (equipped with the calling device)
to confirm, then you are able to setup
Storage Help
Note: Please make sure every room has its own room number to avoid confliction.

10.3 Ringtone Setup

Under system setup interface, choose MUSIC SET, touch
ringtone/ringing volume/ringing time.
Storage Help
A. Ringtone
Ringtone for Door1/Door 2: Under ringtone setup interface, choose MUSIC CH1 or MUSIC CH2, and
touch to confirm, then you are able to choose your favorite ringtones.
Operation
2ND / PEDAL CTRL
2ND
1
ROOM NO. SET
MUSIC SET
TIME 20XX/01/01 01:00
RESET
LANGUAGE ENGLISH
1 2 3 4
to confirm, then you are able to setup
2ND / PEDAL CTRL
2ND
1
ROOM NO. SET
MUSIC SET
TIME 20XX/01/01 01:00
RESET
LANGUAGE ENGLISH
19