Important Safeguards - Verilux VT01-SB Manual

• Do not operate this device near a water source to avoid electrocution.
• Do not use with power supply voltage other than 120 VAC.
• Do not defeat the safety purpose of the polarized plug. A polarized plug has two
blades with one wider than the other. The wider blade is provided for your safety. If
the provided plug does not fit in your outlet, consult an electrician for replacement of
the obsolete outlet.
• Close supervision is recommended when these lamps are used by or near children,
or others who may not understand the need for these precautions.
• Do not operate lamp in close proximity to flammable or combustible vapors, such as
aerosol spray products, or where oxygen is being administered.
• To prevent risk of shock or personal injury when cleaning lamp, make sure you have
turned off and unplugged the lamp, and allowed sufficient time for the bulb to cool.
• If this lamp has been damaged in any way, for example, the power supply cord
or plug has been damaged, liquid has been spilled or objects have fallen onto the
lamp, the lamp has been exposed to rain or moisture, the lamp does not operate
normally or has been dropped, it should not be operated. There are no user
serviceable parts in this lamp.
• Do not block vents. Blocking them may cause overheating of the lamp and increase
risk of fire.
• This bulb contains a trace amount of mercury, a chemical known to the state of
California to cause birth defects or other reproductive harm.
• Some people may experience light sensitivity to fluorescent lighting. Discontinue use
if you experience any discomfort. Follow directions for pretest on page 6 prior to use.
• Certain drugs may induce light sensitivity (e.g., anti-depressants) which may result
in discomfort or a level of hyperactivity. Consult with your health care provider before
using this product.
• If you have a pre-existing eye condition, consult with your health care provider before
using this product.
• These lamps are for indoor use only.
• Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-
radiating products such as heaters. Do not place the lamp on the top of appliances
that radiate heat.
• Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where the power cord exits the lamp.
• This lamp may cause interference with radios, cordless telephones or devices that
use a wireless remote control, such as televisions. If interference occurs, move the
lamp away from the device, plug the lamp or the device into a different outlet or
move the lamp out of the line of sight of the remote control receiver.
VTCP01-MAN-Rev11.indd 4
READ ALL INSTRUCTIONS BEFORE USING

Important Safeguards

DANGER:
WARNING:
CAUTION:
4
3/6/13 10:01 AM