Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Siku 6206L
Summary of Contents for Siku 6206L
- Page 1 Instruction Manual Wall-mounted Heater Model : SIKU 6206L Page 1 of 9...
-
Page 2: General Safety Warning
FOR HOUSEHOLD USE ONLY IMPORTANT INSTRUCTIONS – OPERATING MANUAL READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCTS DESCRIBED PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. - Page 3 The use of an extension cord with this appliance is not recommended. Do not allow cord to come in contact with heated surfaces during operation. If the supply cord is damaged, it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard.
-
Page 4: Description Of The Symbols
CAUTION – Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. DESCRIPTION OF THE SYMBOLS: Before any use, refer to the corresponding section in this user manual. In accordance with European directives applicable to this product Class II symbol: this appliance is designed with double insulation. -
Page 5: Operation
10mm, and hang up the machine after the screws are fixed enough. OPERATION 1. Connect to any 220-240V, 50Hz, AC source. Press the ON/OFF switch at the right side, the heater standby, LED will display room temperature, then use remote control or button on control panel to set power and time. 2. - Page 6 3. Turn on the heater by Press the “ ” button, will set the heater into 1000W power(I). 4. Press the “ ” button again, set the heater into 2000W power(II). 5. Press the “ ” button, the louver will oscillate automatically,press again,the louver stop oscillating.
- Page 7 Control panel Indicator light Indicator light LED display Temperature indicator light On/off indicator light Timer indicator light Timer indicator light Louver oscillation Heating indicator light indicator light Timer ON/OFF Louvers Heating oscillating Timer This function will work in any mode. The timer function allows you to set the time of operation from 1 hour to 8 hours.
-
Page 8: Overheat Protection
In this case, unplug the appliance, wait about 30 minutes for it to cool and remove the object which is obstructing the grids. Then switch it back on as described above. TECHNICAL SPECIFICATIONS: Model 6206L Rated Voltage 220-240V~ Rated Frequency... - Page 9 Siku Vertriebsges.m.b.H Bundesstraße 5, A-2102 Bisamberg | Tel +43 (0)2262 61 521, Fax +43 (0)2262 61 520 | email office@siku.cc www.siku.cc Page 9 of 9...
Need help?
Do you have a question about the 6206L and is the answer not in the manual?
Questions and answers