Connecting A Vcr; Connecting A Game Console Or Camcorder - Pioneer PDP-428XG Operating Instructions Manual

Using with other equipment

Connecting a VCR

Use the INPUT 3 terminals when connecting a VCR and other
audiovisual equipment.
Use either an S-Video or standard video cable for the video signal.
Use a stereo audio cable for the audio. (If you're using the standard
video input, you can use a red/white/yellow audio/video cable.)
MONITOR SUB
OUT WOOFER
(Rear view)
MONITOR SUB
OUT WOOFER
VCR
VCR playback
To watch a VCR image, press INPUT 3 on the remote control unit
or press INPUT on the plasma television to select "INPUT 3".
Note
• Signal priority for the INPUT 3 terminals is (1) S-Video, (2)
Video.
• Connect only the type of video cable that will actually be used.
• Refer to your VCR operation manual for the signal types
available.

Connecting a game console or camcorder

Use the INPUT 6 terminals to connect a game console, camcorder
and other audiovisual equipment.
Use either an S-Video or standard video cable for the video signal.
Use a stereo audio cable for the audio. (If you're using the standard
video input, you can use a red/white/yellow audio/video cable.)
S-Video cable
Audio/Video cable
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or camcorder,
press INPUT 6 on the remote control unit or press INPUT on the
plasma television to select "INPUT 6".
Note
• Signal priority for the INPUT 6 terminals is (1) S-Video, (2)
Video.
• Connect only the type of video cable that will actually be used.
S-Video cable
Audio/Video cable
Game console/camcorder
10
43
En