Setting Up; Setting Up Tv Channels Automatically; Setting Up Tv Channels Manually - Pioneer PDP-428XG Operating Instructions Manual

Setting up

Chapter 8
Setting up

Setting up TV channels automatically

This section describes how to automatically search for and set up
TV channels.
Using Auto Installation
When the plasma television is switched on for the first time after
purchase, the initial auto installation is initiated. You can set
language, region and channels in successive operations.
1 Select "Language" (/).
2 Select a language (/).
Auto Installation
Language
Region
Channel Allocation
Installation
You can select from among five languages; English, Spanish,
Portuguese, traditional Chinese and simplified Chinese.
3 Select "Region" (/).
4 Select your region (/).
Select the country or region in which you live. If it is not listed,
select "Other regions".
5 Select "Channel Allocation" (/).
6 Select "General", "Air (US Type)" or "Cable (US Type)" (/
).
The table on page 65 (Standard channel allocation selections for
countries and regions) shows which option you should usually
select in your country or region.
Item Description
General Scans to locate your regional broadcasting
frequencies. The earlier the frequencies identified, the
smaller the channel numbers used.
Air (US Type) Searches for the same broadcasting frequencies as for
receiving over air in the U.S. This selection is effective
when the system is receiving over air.
Cable (US Type) Searches for the same broadcasting frequencies as for
watching cable TV in the U.S. This selection is effective
when the system is receiving from a cable TV company.
7 Select "Start" (/ then ENTER).
Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
• You can start Auto Installation from the HOME MENU after
• If no channels are found, check the antenna connections, and

Setting up TV channels manually

Use the Manual Adjust function to set up TV channels manually.
English
Steps 5 to 14 differ depending on your selection for Channel
Australia Allocation.
General
1
2
3
The password entry screen appears. Enter your four-digit password
using buttons 0 to 9. For the password, see Using a password on
Start
page 40.
4
5
6
• With "General" selected, you can select 1 through 99.
• With "Air (US Type)" selected, you can select 2 through 69.
• With "Cable (US Type)" selected, you can select 1 through 125.
7
8
You can also press / to enter a frequency.
• With "Air (US Type)" or "Cable (US Type)" selected, you cannot
9
10 Select a sound system (/).
You can select from among "B/G", "D/K", "I" and "M/N".
• With "Air (US Type)" or "Cable (US Type)" selected, you cannot
Note
moving to another country, for example. Perform the following
steps before starting Auto Installation: Press HOME MENU,
select "Setup" (/ then ENTER), then "Auto Installation" (/
 then ENTER). The password entry screen appears. Enter
your four-digit password using buttons 0 to 9. For the
password, see Using a password on page 40.
then retry Auto Installation.
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "Analog TV Setup" (/ then ENTER).
Select "Manual Adjust" (/ then ENTER).
Select "Program Entry" (/).
Select a program number (/).
Manual Adjust
Program Entry
Search
System
Color System
Store
Tuner NR
Child Lock
High Deviation
Select "Search" (/).
Enter a frequency using buttons 0 to 9, then ENTER.
change the display frequency.
Select "System" (/).
change the factory default ("M/N").
08
1
44.25MHz
B/G
Auto
Yes
On
View
Off
25
En