JVC KD-S733R Service Manual page 7

Removing the control switch board
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the four screws G attaching the rear cover
on the back of the front panel assembly.
2. Unjoint the ten joints c with the front panel and the
rear cover.
3. Remove the control switch board on the back of the
front panel.
(See Fig.10 to 12)
Front panel
Joints c
G
Rear cover
G
Fig.10
Joints c
Joints c
Fig.11
Front panel
Control switch board
Fig.12
KD-S733R/KD-S731R
G
G
Joints c
Rear cover
1-7