Pioneer DVR-LX70 Operating Instructions Manual page 53

Hdd/dvd recorder
Table of Contents

Advertisement

Playback
Press to skip to previous/next
PREV
NEXT
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
During playback, enter a title
ABC
DEF
number then press ENTER to
GHI
JKL
MNO
skip directly to that title.
PQRS
TUV
WXYZ
Press CLEAR to clear a number
CLEAR
entry and start again.
CLEAR
ENTER
(Commercial back/skip) Each
CM
BACK
SKIP
press skips backward/forward
progressively up to a maximum
of two hours in either direction.
Press to start slow-motion
STEP/SLOW
playback. Press repeatedly to
change the playback speed.
While paused, press to advance
a single frame in either
direction.
Playing CDs and WMA/MP3 discs
The table below shows the basic playback
controls for Audio CDs
files.
Press to start playback.
PLAY
Press to stop playback.
STOP
Pauses playback, or restarts
PAUSE
playback when paused.
Note
1 If you want to play a DTS Audio CD, make sure the recorder is connected to a DTS-compatible amplifier/receiver
with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is
selected using the
AUDIO button (see Switching audio channels on page 61).
2 When playing in PBC mode, some playback features, such as search, repeat and programme play are not
available. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc
Navigator (see Using the Disc Navigator with playback-only discs on page 56).
1
, and WMA/MP3
Press to start scanning. Press
REV SCAN FWD SCAN
again to increase the scanning
speed. (There are two scan
speeds; the current scan speed
is shown on-screen.)
Press to skip to previous/next
PREV
NEXT
track.
Playing Video CD/Super VCDs
The table below shows the basic playback
controls for Video CD/Super VCDs.
Some discs feature Playback Control (PBC
for short) menus. These discs show PBC in
the display when you load them and display
a menu on-screen from where you can select
2
what to watch.
Press to start playback.
PLAY
Video CD only: If RESUME is
displayed on-screen, playback
starts from the place last
stopped.
Press to stop playback.
STOP
Video CD only: You can resume
playback from the same point
by pressing  PLAY. (Press
 STOP again to cancel the
resume function.)
Pauses playback, or restarts
PAUSE
playback when paused.
Press to start scanning. Press
REV SCAN FWD SCAN
repeatedly to increase the
scanning speed.
Press to skip to previous/next
PREV
NEXT
track.
When a PBC menu is displayed,
press to display the previous/
next page. (During playback
you can also use the front panel
CH +/– buttons.)
06
53
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-7000Dvr-310Dvr-510h

Table of Contents