Pioneer DVR-LX70 Operating Instructions Manual page 39

Recording
Important
• A timer recording can't be set if there are
already 32 timer programmes waiting to
be recorded.
• Timer recording will not start if:
– The recorder is already recording.
– A disc is being initialized, finalized or
unfinalized.
• Timer recording will start when the operation
preventing timer recording has finished.
• When the front panel display is set to ON,
the timer indicator (
panel display when the timer is active. If
the indicator is blinking it means that (for
a DVD timer recording) there is no disc
loaded, or the disc loaded is not
recordable (for an HDD timer recording it
means that the HDD is not recordable).
• Approximately two minutes before a
timer recording is set to start, the
recorder will go into timer recording
standby. In timer recording standby you
cannot use some functions.
• The maximum length for timer
recordings made to the HDD is 24 hours.
However, because one title (HDD) is
limited to 12 hours, recordings over
12 hours will be spread over two titles.
Note that there will be a break in the
recording of a few seconds between
titles.
• When a scheduled recording finishes,
this unit's power is not turned off if the
power for the plasma television is on. If
you want this unit's power to turn off
after a timer recording finishes, set the
HDMI Control to Off (page 117).
Easy Timer Recording
As the name suggests, Easy Timer
Recording makes setting up a timer
recording as simple as possible.
Important
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
) lights in the front
HOME
MENU
1 Select 'Timer Recording', then
'Easy Timer' from the Home Menu.
PREV NEXT
2 Set the TV channel to
record.
Easy Timer Recording
AM
8:00 9:00 10:00
1/01
1/02
1/03
1/01 9:30
MON
 
7ch
REC MODE
REC MODE
3 Set the recording quality.
• DVD recording: The AUTO option
automatically sets the best recording
quality for the space available on the disc
loaded at the time of recording.
• HDD recording: The AUTO option
automatically sets the best recording
quality that would fit on to a blank DVD
disc.
4 Select the HDD or
HDD DVD
DVD for recording.
5 Move the cursor to the
recording start date and time on the grid.
• You can move the cursor forward or back
an hour at a time using the
 REV SCAN and  FWD SCAN
buttons.
Current time
Easy Timer Recording
AM
8:00 9:00 10:00
1/01
1/02
1/03
1/01 11:45
MON
 
7ch
REC MODE
PM
11:00 12:00 1:00 2:00
– ––:––
AM
HDD/DVD
SP HDD
Recording start time
PM
11:00 12:00 1:00 2:00
– ––:––
AM
SP HDD/DVD HDD
05
39
En