Pioneer DVR-LX70 Operating Instructions Manual page 52

Hdd/dvd recorder
Table of Contents

Advertisement

Playback
06
STOP
4
Press to stop playback.
5
When you've finished using the
recorder, eject the disc and switch the
recorder back into standby.
Playing DVD discs
The table below shows the basic playback
controls for DVD-Video, and recordable DVD
discs.
Press to start playback.
PLAY
If RESUME is displayed on-
screen, playback starts from the
place last stopped.
Press to stop playback.
STOP
You can resume playback from
the same point by pressing
 PLAY. (Press  STOP again
to cancel the resume function.)
Pauses playback, or restarts
PAUSE
playback when paused.
Press to start scanning. Press
REV SCAN FWD SCAN
repeatedly to increase the
scanning speed.
Press to skip to previous/next
PREV
NEXT
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
DVD+R/DVD+RW only:
 PREV may not always skip
to the previous title.
Except VR mode: During
ABC
DEF
playback, enter a chapter
GHI
JKL
MNO
number then press ENTER to
PQRS
TUV
WXYZ
skip directly to that chapter
CLEAR
within the currently playing title.
CLEAR
On some discs, you can also
ENTER
use the number buttons to
select numbered items in the
disc menu.
VR mode only: During playback,
enter a title number then press
ENTER.
All: Press CLEAR to clear a
number entry and start again.
52
En
(Commercial back/skip) Each
CM
BACK
SKIP
press skips backward/forward
progressively up to a maximum
of two hours in either direction.
Press to start slow-motion
STEP/SLOW
playback. Press repeatedly to
change the playback speed.
While paused, press to advance
a single frame in either
direction.
Press to display the menu of a
MENU
DISC NAVIGATOR
DVD-Video disc. (DVD+R/+RW
TOP MENU
discs finalized on this recorder
will display the Disc Navigator.
Press MENU to display the disc
menu.)
Use the cursor buttons to
navigate DVD-Video disc
ENTER
menus; press ENTER to select
items.
Press to return to the previous
RETURN
level of a DVD-Video disc menu.
Playing from the HDD
The table below shows the basic playback
controls when playing video recorded on the
hard disk (HDD).
Press to start playback.
PLAY
If RESUME is displayed on-
screen, playback starts from the
place last stopped. Playback
automatically stops after the
end of a title is reached.
Press to stop playback.
STOP
You can resume playback from
the same point by pressing
 PLAY. (Press  STOP again
to cancel the resume function.)
Pauses playback, or restarts
PAUSE
playback when paused.
Press to start scanning. Press
REV SCAN FWD SCAN
repeatedly to increase the
scanning speed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-7000Dvr-310Dvr-510h

Table of Contents