Pioneer DVR-LX70 Operating Instructions Manual page 111

The Initial Setup menu
Setting
Dual Mono
Recording
(Taiwan and
Philippines model)
When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording
Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the
one you want on playback.
Bilingual Recording
(Other)
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format
set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you
want on playback.
DV Input
Audio Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
Options Explanation
L • Select to record the left channel of an external dual
mono source when recording to DVD in Video mode,
to HDD with HDD Recording Format set to Video
Mode On, or in LPCM mode.
R As above, but for right channel recording.
A/L •
Record the left (A) channel of a bilingual source
when recording to HDD with HDD Recording Format
set to Video Mode On, to DVD in Video mode or in
LPCM mode, from an external source.
B/R
As above, but for right (B) channel recording.
Stereo 1 • Select to use the 'live' audio track (recorded during
the video shoot) from a camcorder that supports two
stereo audio tracks.
Stereo 2
Select to use the overdubbed audio track from a
camcorder that supports two stereo audio tracks.
Mix Select one of the three settings to use a mix of the
two stereo audio tracks.
Dolby Digital • Output a Dolby Digital signal when a Dolby Digital
source is being played.
Dolby Digital 
Convert Dolby Digital sources to Linear PCM output.
PCM Use if your connected equipment doesn't have a
Dolby Digital decoder.
On •
Output a DTS signal when a DTS source is being
played.
Off Switch off the digital output when a DTS source is
being played. Use when your connected equipment
doesn't have a DTS decoder. In this case, use the
analog audio outputs.
96 kHz 
Convert 96 kHz digital audio sources to 48 kHz
48 kHz • output. Use if your connected equipment doesn't
support 96 kHz sampling rate.
96 kHz
Output 96 kHz digital audio when a 96 kHz source is
being played.
14
111
En