Configuring Ethernet Settings - ICP DAS USA tDS-700 Quick Start Manual

Configuring Ethernet Settings

1. Double click the VxComm Utility shortcut on the desktop.
2. Click the "Search Servers" button to search your tDS-700.
3. Double click the name of tDS-700 to open the configure server
dialog box.
4. Contact your Network Administrator to obtain a correct
network configuration (such as IP/Mask/Gateway). Enter
the network settings and then click "OK". The tDS-700 will use
the new setting 2 seconds later.
tDS-700 Series Quick Start Guide
4